HMC1395 CNC Horizontal Machining Center

1.X,Y,Z adopt heavy-load roller linear guide ways, improving machine’s rigidity；

2.Using the international advanced high-speed silent lead screw improves the positioning accuracy of the machine tool.

3.60m/min rapid feed speed reduces machining time and improves machining efficiency；

4.The machine tool adopts T-shaped integral bed, and the structure is more reasonable through finite element analysis in the design process；

5.with advanced Fanuc 0i MF or Siemens system；high stability, fast speed；

6.The B-axis servo motor drives the table to rotate through the worm gear reduction.

7.Rotary table with automatic indexing function, tooth plate positioning and high positioning accuracy.

8.Spindle adopts direct drive spindle, high speed, no vibration, high processing accuracy

9.The headstock lift adopts nitrogen-hydraulic balance cylinder, which enhances the lift response speed；

10.The machine tool is equipped with a sealed guide rail protection cover, and the X and Y direction protection cover adopts an integral wall type protection cover, which enhances the protection level of the machine tool, effectively protects the guide rail and the lead screw, and prolongs its service life;

11.The machine tool adopts fully closed outer protection to prevent the spatter of cutting fluid during rapid machining.

12.The operating system is grounded, which is convenient for users to operate and greatly protects the operator's safety.

13.The front part of the machine is equipped with a door which has large opening to facilitate the operator to change the workpiece.

14.The machine is equipped with Taiwan famous brand tool magazine, 40pcs tool magazine,ATC.

15.The machine tool is equipped with an automatic lubrication system. It is controlled by an independent PLC and automatically distributes the oil according to the operating distance, which greatly reduces the waste of lubricant and avoids the decrease of the life of the lead screw and linear guide due to the lack of lubricant.

16.There is an automatic chip removal device in the middle of the machine bed. The chain plate chip conveyor discharges the iron chips under the spindle to the chain plate type chip conveyor at the back of the bed. After the chain plate type chip conveyor is lifted, the iron chips are collected into the chip collection In the car, the residual heat on the iron filings is quickly taken away, and the precision of the machine tool is more stable.

17.The rear guide rail of the bed is stepped, with a low front and a high back, and a large height difference , which can not only reduce the weight of the moving parts (columns) and improve the response speed of the machine tool, but also offset the backward overturning moment of the machine tool during cutting and improve the machining stability of the machine tool .