Q1319-1A Pipe Threading Lathe machine

This lathe meets the special requirements of users in the petroleum, geological, mining

and chemical industries, and in agricultural irrigation and drainage, it is able to cut various

straight and taper pipe threads of union joints, drill rods, casting pipes, drain pipes, well castings

and warter pump pipes more economically and efficiently as compared with the engine lathe,

however, it may serve as an engine lathe to cut various metric, with worth and module threads, shafts and disks.

Product Detail

1. The machine is equipped with a tapering unit which can work out a ±1:4 taper.

2. It is able to cut both metric and threads without changing the translating gear.

3. The dripping worm in the apron can protect the mechanisms of the lathe automatically.

4. The guide way is hardened and finely finished.

5. The geat power of the machine is competent at heavy load and power cutting.

6. The floor center rest can be moved freely as required by the user.

7. The center rest is provided with an adjustable clamp unit for long pipes, greatly reducing intensity of labor.

8. The double 4-jaw chucks offer free clamp of both short and long pipes.

MODEL	Q1319—1A
Bed width	490
Turning diameter over bed (max.)	630
Max.Turning diameter over carriage	350
Max. diameter of pipe (manual chuck)	193
Turning length (Max.)	1500
Spindle bore	200
Spindle speed steps	12 steps
Range of spindle speed	24-460 r/min
Inch threads (T.P.I)	28～2/40
Metric threads（mm）	1～14/24
Main motor power	11kw
Machining length of taper scale	500 mm
Rapid travel of tool post	6000mm/min